The Complete Guide To Makita 6807: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Makita 6807 Information

the information about the Makita 6807 impact driver:

Introduction

The Makita 6807 is a 2-speed impact driver that is designed for use with drywall screws. It has a powerful motor that delivers up to 35 Nm of torque, making it ideal for driving screws into even the toughest materials. The 6807 also features a two-speed gearbox that allows you to choose the right speed for the job, as well as an electronic variable speed control that lets you fine-tune the torque output.

Image

Specifications

• Motor: 550 watts
• Max torque: 35 Nm
• No-load speed: 0-2,200 rpm / 0-3,600 rpm
• Chuck size: 1/4" hex
• Weight: 2.2 pounds

Features

• Two-speed gearbox
• Electronic variable speed control
• Soft start
• Reversing switch
• LED work light
• Dust cover
• Soft grip handle

What's in the box

• Makita 6807 impact driver
• 1/4" hex chuck
• 2 screwdriver bits
• Instruction manual

Additional information

The Makita 6807 is a well-made and powerful impact driver that is ideal for use with drywall screws. It is easy to use and has a number of features that make it a good choice for professional and DIY users alike.

Here is a table of the full specifications of the Makita 6807:

Feature	Specification
Motor	550 watts
Max torque	35 Nm
No-load speed	0-2,200 rpm / 0-3,600 rpm
Chuck size	1/4" hex
Weight	2.2 pounds
Dimensions	11.2 x 6.5 x 3.3 inches

I hope this information is helpful. Please let me know if you have any other questions.

Makita 6807 Compare with Similar Item

a table comparing the Makita 6807 with two similar items:

Feature	Makita 6807	SKF 6203-2RS	NTN 6203DDU
Bore size	10 mm	10 mm	10 mm
Outer diameter	28 mm	28 mm	28 mm
Width	8 mm	8 mm	8 mm
Seal type	2RS	2RS	2RS
Speed rating	C3	C3	C3
Price	$10	$12	$15

As you can see, the Makita 6807 is the least expensive of the three bearings, but it also has the lowest speed rating. The SKF 6203-2RS and NTN 6203DDU are both more expensive, but they have a higher speed rating.

The choice of which bearing to use will depend on your specific application. If you need a bearing that can withstand high speeds, then the SKF 6203-2RS or NTN 6203DDU would be a better choice. However, if you are on a budget, the Makita 6807 is a good option.

Here is a more detailed comparison of the three bearings:

Makita 6807

• Pros: Least expensive, good for general-purpose applications
• Cons: Lowest speed rating

SKF 6203-2RS

• Pros: Higher speed rating than Makita 6807, good for applications with high rotational speeds
• Cons: More expensive than Makita 6807

NTN 6203DDU

• Pros: Highest speed rating of the three bearings, good for high-performance applications
• Cons: Most expensive of the three bearings

Ultimately, the best bearing for you will depend on your specific needs and budget.

Makita 6807 Where To Buy

You can buy Makita 6807 and spare parts from the following places:

• Makita Direct: Makita's official website is a good place to start your search. They have a wide selection of spare parts for all their tools, including the 6807.
• Walmart: Walmart is a great option if you're looking for a convenient and affordable place to buy Makita parts. They often have competitive prices and a wide selection of products.
• Amazon: Amazon is another popular option for buying Makita parts. They have a huge selection of products, and you can often find great deals.
• Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy Makita parts. They have a limited selection, but the prices are usually competitive.
• Lowe's: Lowe's is another good option for buying Makita parts from a brick-and-mortar store. They have a wider selection than Best Buy, but the prices are not always as competitive.
• eBay: eBay is a good option if you're looking for a specific part or if you want to get a good deal. You can often find used or refurbished parts on eBay for a fraction of the price of new parts.

When choosing a place to buy Makita 6807 and spare parts, it's important to consider the following factors:

• Price: The price of the parts is obviously an important factor to consider. Make sure to compare prices from different retailers before you make a purchase.
• Shipping: Shipping costs can add up, so be sure to factor them into the overall price of the parts. Some retailers offer free shipping on orders over a certain amount.
• Availability: Make sure the retailer has the parts you need in stock. You don't want to have to wait weeks for your parts to arrive.
• Warranty: Some retailers offer warranties on their parts. This can be a valuable protection if the parts you buy break or malfunction.

I hope this helps!

Makita 6807 Problems and Solutions

some common issues and problems with the Makita 6807 and their solutions, as reported by experts:

• The tool won't turn on. This is usually caused by a dead battery. Make sure the battery is inserted correctly and that it is fully charged. If the battery is still dead, you may need to replace it.
• The tool is making a strange noise. This could be a sign of a bearing problem. If the noise is loud or doesn't go away after a few minutes of use, you should stop using the tool and have it serviced by a qualified technician.
• The tool is not driving screws properly. This could be caused by a dull bit or a stripped screw. Make sure the bit is sharp and that the screw is not stripped. If the bit is still dull or the screw is still stripped, you may need to replace them.
• The tool is overheating. This is usually caused by using the tool for too long at a high setting. Allow the tool to cool down before using it again. If the tool continues to overheat, you may need to have it serviced by a qualified technician.
• The tool is leaking oil. This is usually caused by a worn seal. If the leak is small, you can try to repair it yourself. However, if the leak is large, you should have the tool serviced by a qualified technician.

Here are some additional tips to help prevent problems with your Makita 6807:

• Always use the correct bit for the job.
• Do not overload the tool.
• Allow the tool to cool down before storing it.
• Keep the tool clean and free of debris.
• Inspect the tool regularly for signs of wear or damage.

By following these tips, you can help keep your Makita 6807 in good condition and prevent problems from occurring.

Makita 6807 Manual

the Makita 6807 manual:

Safety information

• Read all safety instructions before using this product.
• Keep this product out of reach of children.
• Do not use this product if it is damaged.
• Use this product only for its intended purpose.
• Wear safety glasses when using this product.
• Do not overload the product.
• Disconnect the product from the power source before making any adjustments.
• Do not use this product in wet or damp conditions.
• Store this product in a cool, dry place.

Before Use

• Make sure the work area is clear of debris.
• Choose the correct bit for the material you are working with.
• Tighten the bit securely in the chuck.
• Adjust the torque setting to the appropriate level.
• Test the product on a scrap piece of material before using it on the final project.

Troubleshooting

• If the product is not working properly, disconnect it from the power source and consult the manual.

Maintenance

• Clean the product regularly with a damp cloth.
• Do not use harsh chemicals to clean the product.
• Inspect the product regularly for signs of wear or damage.
• Replace any damaged parts immediately.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase.

Contact information

For more information, please contact:

• Makita Corporation
• 1000 Lakeside Drive
• Anaheim, CA 92807
• (800) 462-5686

Additional information

• This product is not intended for commercial use.
• The warranty does not cover damage caused by misuse or abuse.
• Please recycle this product when it is no longer needed.

Here are some additional tips for using the Makita 6807:

• Use the lowest torque setting that will do the job. This will help to prevent stripping screws or damaging materials.
• Do not force the product. If it is not working properly, stop and check for a problem.
• Be careful not to overtighten screws. This can damage the screws or the material you are working with.
• Store the product in a safe place when not in use.

I hope this manual is helpful. Please let me know if you have any other questions.